アプリケーション ノート

This manual describes the software implementation including driver libraries used to control InnoSwitch4-Pro operations. Important aspects of this document are calculations for the values to be programmed for various configurations such as voltage, current, cable drop compensation, constant power, I²C command sequences to prevent any unexpected behaviors, device responses and code examples.

This application note is intended for engineers designing an isolated AC-DC flyback power supply using TinySwitch-4 family of devices. It provides guidelines to enable an engineer to quickly select key components and also to complete a suitable transformer design.

This application note provides information for designing a non-isolated power supply using the LinkSwitch-TNZ family of devices. This document describes the design procedure for buck and buck-boost converters.

This application note is intended to assist in designing an isolated AC-DC flyback power supply or charger using the InnoSwitch3-PD device. It provides guidelines for selecting key components and the information necessary to complete a suitable transformer design.

This application note is intended as a design guide for engineers designing an isolated AC-DC single-stage flyback power supply using the MinE-CAP family of devices. It is assumed that the designer is using the MinE-CAP together with the InnoSwitch3 family of power conversion ICs. However, the design equations shown can be used for applications beyond the scope of this document.

This application note (AN) provides guidance for using LinkSwitch-XT2 and should be read in conjunction with and in the context of the LinkSwitch-XT2 family data sheet.

This application note (AN) provides guidance for using TinySwitch-III and should be read in conjunction with and in the context of the TinySwitch-III family data sheet.

This application note (AN) provides guidance for using TinySwitch-LT and should be read in conjunction with and in the context of the TinySwitch-LT family data sheet.

This application note (AN) provides guidance for using InnoMux chipset and should be read in conjunction with and in the context of the InnoSwitch3-MX and InnoMux family data sheets.

Provides guidance to developers on how to use an evaluation board (TST-047) to test and debug InnoSwitch3-Pro based power supplies.

This application note describes the use of a tool made using an Arduino-UNO and an LCD Display shield which enabled evaluation of the power stage made using InnoSwitch3-Pro.

These guidelines apply to InSOP packages without bottom exposed pads (such as InSOP-24D). InSOP packages with bottom exposed pads (such as InSOP-24B, InSOP-24C) must be board mounted using IR/convection reflow.

This application note is intended for engineers designing an isolated AC-DC flyback power supply or charger using the InnoSwitch3 family of devices. It provides guidelines to enable an engineer to quickly select key components and also complete a suitable transformer design.

Download the code library: InnoSwitch3-Pro Code Library and API for Arduino

Download the code library: InnoSwitch3-Pro Code Library and API for Microchip PIC16F18325

Provides guidance to developers on how to program the InnoSwitch3-Pro product through its I²C interface.

LinkSwitch-3 ファミリー設計ガイド

This application note is intended for engineers designing an isolated AC-DC flyback power supply using LinkSwitch-HP devices. It provides guidelines to enable an engineer to quickly select key components and also complete a suitable transformer design.

Qspeed Family RoHS Compliant Soldering Considerations